UV Hard Coat & UV Anti Fog

 
（More infromation ）
Typical Properties Compatible Substrates
% Solids Viscosity
（Cp @25°C）		 Application Cure Typical
FT（μm）		 Typical
Bayer		 PC PMMA PET HIRI PA
30 - 34 3.0 - 7.0 Dip/spin 800-900mJ/cm2 3.0 - 5.0 1.5 ✔ ✔ ∎ ∎  
30 -34 4.0 - 7.0 Dip/spin 900mJ/cm2 3.5 - 5.0 ≥1.5 ✔ ✔ ✘ ∎  
  6.0 - 8.0         ∎ ∎ ∎ ∎ ∎
38 -42 6.0 - 10.0 Spray 1-2 J/cm2
PMMA
2-3 J/cm2		 8 - 10
PMMA
13 - 15		 - ✔ ✔ ✘ ∎ ✘
65 - 70 12.0 - 17.0 Dip/spin/
roll to roll		 800-900mJ/cm2 5.0 - 10.0 ≥1.3 ✔ ∎ ✔ ∎ ∎
34.5 - 36.5 9.0 - 11.0 Spin 0.9-1.0 J/cm2
1hr @		 3.0 - 5.0 2.0 - 4.0 ✔ ∎ ∎ ∎ ∎
34.5 - 36.5 9.0 - 11.0 Spin 0.9-1.0 J/cm2
1hr @		 3.0 - 5.0 2.0 - 4.0 ✔ ∎ ∎ ∎ ∎
100 35 - 100 Spin 1.1-1.20 J/cm2 6.0 - 9.0 ≈2 ✔ ∎ ∎ ∎ ✔
100 35 - 45 Spin 1.1-1.20 J/cm2 5.0 - 7.0 1.5 ✔ ∎ ∎ ✔ ∎
30 -34 ≤10 Dip 1.2 J/cm2 PC
2.0 J/cm2 PA		 3.5 - 4.0 ≈2 ✔       ✔
46 - 52 8.0 - 15.0 Dip 1.6 J/cm2 PC
30 mins @100℃		 5.0 - 7.0 1.5 - 2.5 ✔        
100 35 - 40 Spin 2.2 J/cm2 4.0 - 6.0 1.7 ✔ ✔   ✔ ✔
23 1.0 - 1.5 Spin 2.0 J/cm2 1.2 - 1.5 1.8 ∎        
45 17.5 - 18.5 Di✔ 2.0 J/cm2 4.5 - 5.0 1.8 ✔ ✔      
52 10 - 14 Dip 1.50 J/cm2 4.0 - 5.0 1.1 ✔ ✔      
100 35 - 40 Spry, Spin 2.0 J/cm2 10 - 25   ✔ ✔     ✔
46 7.5 - 8.5 Spin 2.0 J/cm2 4.0 - 5.0 1.5 ✔